43
5-4. Basic settings for Detail
MENU > SCENE FILE > (Factory default settings underlined)
[MASTER DETAIL] -31 - - - 0 - - - +31
Adjusts the level of overall Detail effect.
[DETAIL CORING] 0 - - - +1 - - - +60
Sets the level of signal (including noise) that suppresses the Detail effect.
[SKIN TONE DETAIL] ON / OFF
Sets the level of detail effect for a certain color (skin) tone.
[V DETAIL LEVEL］ -7 - - - 0 - - - +7
Sets the intensity of Detail level in the vertical direction.
[KNEE APE LEVEL］ 0 - - - 2 - - - 5
Sets the Detail level of high-luminance areas (very bright areas).
Detail control
This is an outline signal which is added to a video signal.
If the Detail level is increased, the edges of video signal will be intensified and outlines in the
picture will look sharper. If the Detail level is decreased, the edges of video signal will be
weakened and the picture will look softer with its outline enhancement suppressed.
5. Understanding scene file operations
Luminance signal with
NO Detail signal added
Luminance signal with
Detail signal added
To Next Page
Loading...
