28
DISPLAY SETTING <continued>
Value (Factory default setting underlined)
Show the following item
information.
Zoom, OIS, Iris, Gain,
ND filter position,
focus position, white balance,
shutter speed etc.
Show remaining time of SD
card and battery.
Show the information other
than the following.
USER buttons, Guide lines,
Safety zone, Center marker,
Date&time, Audio level meter,
Lens status, remaining time
(SD card and battery)
Set brightness of the built-in
LCD monitor.
Adjust image characteristics of
the built-in LCD monitor.
COLOR, BRIGHTNESS, CONTRAST
Adjust image characteristics of
the viewfinder.
COLOR, BRIGHTNESS, CONTRAST
Set sensitivity of the proximity
sensor on the viewfinder.
Set display mode of the
built-in LCD monitor. Choose
“MIRROR” when performing
self-portrait recording. (Image
can be inverted horizontally.)
Turn OFF color image display
on the Viewfinder.
Turn ON edge enhancement
feature on the viewfinder and
the built-in LCD monitor for
easy focusing.
Set enhancement level in the
EVF/LCD DETAIL setting.
Set enhancement frequency in
the EVF/LCD DETAIL setting.