- 155 -
Sets which White Balance mode to use when the WHITE BAL button is pressed to switch to the
PRST position.
Sets the color temperature when the White Balance mode is set to [VAR]. (l 63)
1 Touch [WB VAR].
2 Touch / to adjust settings.
≥ You can select a value between 2000K and 15000K.
3 Touch [EXIT] to exit the menu screen.
≥ This function’s default setting is [3200K].
Sets the Focus Assist method for the FOCUS ASSIST button and the USER button to which
[FOCUS ASSIST 1] is registered. (l 56)
Sets the Focus Assist method for the USER button to which [FOCUS ASSIST 2] is registered.
(l 56)
This item is not available when [FOCUS ASSIST 1] is set to [BOTH].
≥ Set [FOCUS ASSIST 1] to [EXPAND] or [PEAKING]
You can set the peaking color for Focus Assist. (l 58)
You can set the peaking strength for Focus Assist. (l 58)
≥ This function’s default setting is “0”.
[WB PRESET]
[3200K]/[5600K]/[VAR]
[WB VAR]
[FOCUS ASSIST 1]
[EXPAND]/[PEAKING]/[BOTH]
[FOCUS ASSIST 2]
[EXPAND]/[PEAKING]
[PEAKING COLOR]
[Red]/[Blue]/[Yellow]/[White]
[PEAKING LEVEL]
AG-UX90EJ_DVQP1150ZA.book 155 ページ ２０１６年１０月２０日 木曜日 午前１１時４４分
To Next Page
Loading...
