- 186 -
CARD ERROR.
PLEASE REFORMAT.
This is displayed when the SD card
cannot be formatted.
≥ Check the SD card.
≥ Replace the SD card in the
card slot at which the error
has occurred.
UNABLE TO FORMAT. Formatting is not possible due to,
for example, a problem with the SD
card.
≥ Check the SD card.
Cannot delete data on
card.
The SD card cannot be formatted.
CANNOT PROTECT. The content versions do not match.
This is displayed when you try to set
protection for scenes recorded with
another device, for example.
≥ Match the device and
content version.
CANNOT RESET
NUMBER.
The SD card cannot be used with
this unit.
≥ Insert a recordable SD
card.
THUMBNAIL RECOVERY
HAS FAILED.
This is displayed if the SD card is
removed or writing to the SD card
fails while recovery is in progress.
≥ Check the SD card.
THUMBNAIL DATA
ERROR IS DETECTED.
This is displayed when thumbnail
information is not recorded
correctly.
≥ The applicable thumbnail
information will be
recovered after this
message disappears.
CANNOT SELECT MORE
SCENES.
The number of scenes that can be
selected with this unit has reached
the maximum limit.
≥ Reselect scenes after
finishing the current editing
task.
SCENE FILE WRITE
FAILED
This is displayed if the SD card is
removed or writing to the SD card
fails while a scene file is being
saved.
≥ Check the SD card.
During USB Device mode
Display Description Behavior and cause
DISCONNECT USB
CABLE.
An error has occurred while
accessing the SD card, or the
OS is not supported.
≥ Check the SD card.
≥ Check to see if the OS is
supported.
Display Description Behavior and cause
AG-UX90EJ_DVQP1150ZA.book 186 ページ ２０１６年１０月２０日 木曜日 午前１１時４４分
To Next Page
Loading...
