Panasonic AV-HS400AE - Page 74

74
4. Input/output signal settings
<Phases and delay amounts of input/output signals during HD format use>
Input
signals
FS:
On, Off
Mode:
Normal, UC or
D by D (cannot be selected
when the system format is
720p)
Video effects
Output
signals
1
Delay:
90H (75H) or 1F
2
 See 4-1-1.
 See 4-11.
Frame synchronizer
DC
(Down-converter)
When the 1080/59.94i format is used:

For 1080/50i, 720/59.94p and 720/50p, the delay of “Output signal 2 DC (90H)” is further delayed by +1F.

For 1080/50i and 720/50p, 90H indicated below becomes 75H.
OutPhs Input
Non-
synchronized
input
Output signal 1
Normal
Output signal 2
DC (90H)
Output signal 2
DC (1F)
System Mode FS Phase
Delay
amount
Phase
Delay
amount
Phase
Delay
amount
Sync signal (Ref): Black burst signal (BBST), tri-level sync signal (TRI), internal reference signal (INT)
1H Normal Off Not possible Ref+1H 1H
1+90H
1H+90H In-phase
with 1
1H+1F
Normal On Possible Ref+1H Max.
1F+1H
1+90H
Max.
1F+1H
+90H
In-phase
with 1
Max.
2
F+1H
UC/
D by D
On
(Forced)
Possible
0H
(Example 1)
Normal/
UC/
D by D
On
(Forced)
Possible In-phase
with Ref
Max.
1F
1+90H
Max.
1F+90H
In-phase
with 1
Max.
2F
Sync signal (Ref): Black burst signal (BBAD)
1H Normal Off Not possible Ref–90H
+1H
1H
1+90H
1H+90H In-phase
with 1
1F+1H
Normal On Possible Ref–90H
+1H
Max.
1F–90H
+1H
1+90H
Max.
1F+1H
In-phase
with 1
Max.
2
F–90H
+1H
UC/
D by D
On
(Forced)
Possible
0H
(Example 2)
Normal/
UC/
D by D
On
(Forced)
Possible Ref–90H Max.
1F–90H
1+90H
(In-phase
with Ref)
Max.
1F
In-phase
with 1
Max.
2F–90H
 Conversion based on the HD format applies for 1H.
 When D
VE effects (SQ, SL, 3D) have been used as the video effects, the output signal is delayed by +1F.
 The phase and dela
y amount for the DVI-I input signals are the same as when UC/D by D is selected since the
frame synchronizer is set to the On mode.
 The D
VI-I output signals are delayed by +1F.
 When images are output to a m
ulti view display, they are delayed by +1F.
When DVI-I output signals are output to a multi view display, the output images are delayed by +2F.