Panasonic Diga DMR-EH59EM User Manual

13
RQT9272
Tips
 Auto-Setup
Auto-Setup starts instead of “Download
from TV” in the following cases:
– when connecting to a television with
the VIDEO OUT, S VIDEO OUT or
COMPONENT VIDEO OUT terminal
( 75)
– when connecting to a television that
does not have the VIERA Link or Q Link
functions
This function automatically tunes all
available TV stations and synchronizes
the time when the TV channel that is
broadcasting time and date information is
tuned. This takes about 8 minutes.
 To cancel setup
Press [RETURN].
 If the unit displays “No stations
found !”
Press [] to select “No”, then press [OK].
Go to step . After you have performed
steps –, turn off the unit and confi rm
the cable or aerial input is connected
to the RF IN terminal. Restart the setup
again ( 67).
 If the clock setting menu appears or
the clock is not correct, set the clock
manually ( 14).
 Restarting the setup ( 67)
 To correct the PIN number
1. Press [, ] to select the digit.
2. Press the numbered buttons to enter
the digit.
 When this unit is not operated for
approximately 5 minutes while the screen
is being displayed, the screen saver may
be displayed.
You can turn this function off ( 70,
“Screen Saver”).

to turn the unit on.
When connecting to a Q Link compatible TV with a fully wired 21-pin
Scart cable or a VIERA Link (HDAVI Control 3 or later) compatible TV
with an HDMI cable ( 42), downloading from the television starts.
– You can download the tuning positions from the television for the
channels in this unit’s channel coverage.
– This unit’s Auto Clock Setting function synchronizes the time when the TV
channel that is broadcasting time and date information is tuned.
Power Save
On: Minimise standby power
consumption, without
Quick Start function and
AV2 loop-through in standby.
Off: With Quick Start
function and AV2 loop-through
in standby.
OK
RETURN
SELECT
On
Off
Power Save Function:
,  to select “On” or
“Off”, then
OK
“On”: It will go into the Power Save mode when the unit is in
standby mode.
“Off”: It is possible to start quickly from the standby mode.
(Quick Start mode)
– The features of the power save function when the unit is in
standby mode are as below.
Power Save On Off
Power consumption Approx. 0.9 W Approx. 9 W
Watching the picture from
the digital satellite receiver
connected to the AV2 terminal
Cannot do Can do
Startup time Not quick
Quick

Front display
Turns off
(The clock display
disappeared.)
Stays lighted

It is possible to startup and start recording within several seconds.
Depending on the type of TV or the connected terminal, it may take time to
display the screen.
When setup has completed, the confi rmation screen appears.
OK
The Owner ID settings screen appears.
, then press the numbered buttons to
enter your choice of a 4-digit PIN number.
Owner ID
RETURN : leave
PIN number

Name
House No.
Postcode
RETURN
Make a note of the PIN number
(don’t forget), as it is not possible
to return to the factory preset.
OK
to store the PIN number.
(continued on the next page)
Preparation:
 Turn on the mains for the television
(and connected equipment) and
select the appropriate AV input to
suit the connections to this unit.
 These are the first settings you make
upon buying the unit. You don’t need
to make these settings again.
S
TAT
US
C
REAT
E
C
HAPTER
RETURN
P
LAY
/
x1.
3
P
A
US
E
S
T
OP
SLOW/SEARCH
SKI
P
CH
S
ELE
CT
INPUT
0
9
8
7
6
54
3
2
1
CH
A
V
A
A

T
V
DRIVE
S
ELE
C
T

VO
L
DELETE
M
AN
U
AL
S
KIP A
U
DI
O
DI
S
PLAY
V
IDE
O
P
l
us
+
EXIT
TIME SLIP
OK
O
PTI
O
N
P
R
O
G
/
C
H
E
C
K
F
U
N
C
T
I
O
N
M
E
N
U
D
I
R
E
C
T
N
A
V
A
I
G
A
T
A
O
R
TV’s remote control
Setting the Channels and Clock
Quick Start Guide STEP 3
DMR-EH59EM.indb13DMR-EH59EM.indb13 2009/01/099:29:492009/01/099:29:49

Panasonic Diga DMR-EH59EM Specifications

General

Brand	Panasonic
Model	Diga DMR-EH59EM
Category	DVD Recorder
Language	English