20
RQT9272
Tips
When “Power Save” is set to “Off”
( 72), you can watch the digital
satellite programme without turning the
unit on.
Notes
You cannot watch digital satellite
programmes during timer recording.
TAT
ETURN
PLAY
x1.
A
E
T
L
W
EAR
ELE
T
VIDE
lus+
TIME
LIP
PTI
N
H
Watching Digital Satellite Programmes
Preparation:
Connect a digital satellite receiver to this unit’s AV2 input terminals
( 11).
Turn on the digital satellite receiver.
Turn on the television and select the appropriate video input to suit
the connections to this unit.
SELECT
INPUT
to select the “AV2”.
Select a channel on the connected
equipment.
Watching Television Programmes
Watching Television Programmes
Preparation:
Turn on the television and select the appropriate video input to suit
the connections to this unit.
2a
CH
to select desired channel.
2b
Enter channels directly with the numbered
buttons.
e. g., “5”:
0
5
5
OK
1
5
Notes
You cannot change the audio type in the following cases.
When a DVD-R, DVD-R DL, DVD-RW (DVD-Video format), +R, +R DL or +RW disc
is in the disc tray while DVD drive is selected.
When the recording mode is XP and “Audio Mode for XP Recording” is set to “LPCM”
( 69).
When “Recording Format” is set to “Video format” (The default setting is “Video
format” 68).
You can view the digital satellite programmes via this unit by following
method when “Power Save ” is set to “On”, and the satellite receiver is
not connected to TV.
DMR-EH59EM.indb20DMR-EH59EM.indb20 2009/01/099:29:552009/01/099:29:55