Panasonic DMR-ES30VEG

12.3. (DVD) SERVICE MODES
Service mode setting: While the power is off, press [DVD DUBBING], [OPEN/CLOSE] and [DVD STOP] keys simultaneously for
five seconds.
Item FL display Key operation
Mode name Description (Remote controller key)
Release Items Item of Service Mode executing is cancelled. Press [0] [0] or [Return] in service
mode.
Error Code Display Last Error Code of U59/H/F held by Timer is
displayed on FL.
*Details are described in “12.1. (DVD) Self-
Diagnosis Functions”.
Press [0] [1] in service mode
ROM Version Display (01)Region code,
(02)MAIN firmware version,
(03)TIMER firmware version,
(04)DRIVE firmware version,
(05)ROM correction version,
(06)VHS microprocessor version are
displayed on FL for five seconds per each
version in order, but
(07)VHS ROM correction version will be left
displayed.
(01)Region code
(02)MAIN firmware version
(03)TIMER firmware version
(04)DRIVE firmware version
(05)ROM correction version+ROM
Type
(06)VHS microprocessor version
(07)VHS ROM correction version
* are version displays
Press [0] [2] in service mode
White Picture Output White picture is output as component Output
from AV Decoder.
*White picture
(Saturation rate: 100%)
*It is enable to switch Interlace/Progressive
by “I/P Switch: [1] [4]”
*Initial mode is “Interlace”. Press [1] [1] in service mode.
Switch Interlace/Progressive Press [1] [4] in White Picture Output
mode.
*I/P are switched alternately.
21
DMR-ES30VEG / DMR-ES30VEC / DMR-ES30VEB