23
RQT9127
Important notes for recording
≥It is not possible to record to both the DV D and the VHS drive simultaneously.
Selecting Audio for
Recording
Broadcast in multi-channel sound (Digital broadcast only):
You can select the audio language when receiving audio in
multi channel broadcast [“Multi Audio” appears at the bottom of
digital channel information display (➡ 15)].
However, audio cannot be switched after recording.
Bilingual broadcasts (Analogue broadcast only):
[RAM] [VHS]
Both main and secondary audio can be recorded.
You can change the audio during playback.
(➡ 33, Changing audio during play)
However in the following cases, select whether to record the
main or secondary audio:
–Recording sound in LPCM (➡ 61,
Audio Mode for XP Recording)
[-R] [-R]DL] [-RW‹V›] [+R] [+R]DL] [+RW]
Select the main or secondary audio before
recording
(➡ 61, Bilingual Audio Selection)
If you record from external equipment
– Select “M 1” or “M 2” on the external equipment.
About the aspect
when recording a
programme
[RAM]
[-R] [-R]DL] [-RW‹V›]
If “Aspect for Recording” in the Setup menu is set to
“Automatic” (The default setting is “Automatic” ➡ 60), the
programme will be recorded in the original aspect used when
recording started (including when recording started at a
commercial, etc.). If recorded with a different aspect, select the
correct aspect (“16:9” or “4:3”).
However, in the following cases, programme will be recorded in 4:3.
≥[-R] [-R]DL] [-RW‹V›] Programme recorded using “EP” or “FR
(recordings 5 hours or longer)” recording modes will be
recorded in 4:3 aspect.
[VHS]
The original aspect used for the source
programme will also be used with the recording.
[+R] [+R]DL] [+RW]
The programme will be recorded in 4:3 aspect.
When recording the
“One time only
recording”
broadcasts
It is not possible to record the broadcasts that allow “One time only recording” onto DVD-R, DVD-R DL, DVD-RW, +R, +R DL,
+RW or 8 cm DVD-RAM discs. Use CPRM (
➡
81) compatible DVD-RAM.
≥Even when copying to videotape the title may not be copied correctly because of the copy guard.
Playing the disc on
other DVD players
[-R] [-R]DL] [-RW‹V›] [+R] [+R]DL]
The disc must be finalised after recording or copying (➡ 56).
It is necessary to finalise DVD-R, etc. on this unit after recording or copying titles to them. You can then play them as a commercially sold DVD-
Video. However, the discs become play-only and you can no longer record or copy.
§
§
You can record and copy again if you format DVD-RW.
[+RW]
If the disc failed to play on other equipment, we recommend you create top menu (
➡ 57
).
Recording to DVD-R DL
and +R DL
DVD-R DL and +R DL discs have two layers of recording surface on one side.
≥It is not possible to record continuously from the first layer to the second layer. Recording stops when
space on the first layer becomes full. You must close the first layer to start recording on the second layer (➡ 57).
Closing makes the first layer unavailable for recording (editing is still available). You cannot cancel closing. Make
certain before proceeding.
Hello
Select the audio that you want to
record in “DVB Multi Audio” in the
on-screen menu (
➡
54).
Hola Hallo
M1
Hello
The selected
audio only is
recorded.
[RAM] CPRM compatible discs only. [-R] [-R]DL] [-RW‹V›] [+R] [+R]DL] [+RW]
(≤: Can do, –: Cannot do)
CHG
SEARCH
E
NT
ER
OFF
ME
NU
RETU
RN
T
O
P MEN
U
DI
SPL
A
Y
V
O
L
ON
A.SUR
R
OUN
D
MO
NI
T
OR
MOD
E
PIC
TUR
E MODE
R
E
PE
A
T
OPEN
DC IN 9V
/I
CD SEQUENTIAL
DISC
DOUBLE RE-MASTER
;
1
://9
DISC EXCHANGE DISC SKIP
<
OPEN/CLOSE
1
2 3 4 5
Play on other DVD equipment
Record to DVD-R, etc.
Finalise
It is not possible
to record
continuously
from the first
layer to the
second layer.
(Disc inner
side)
(Disc outer
side)
The available
space
Title 1 Title 2
Recording/Playback direction
The second layer
The first layer
DVD-R DL
+R DL
Deleting titles/Important notes for recording
DMREZ48VGN-RQT9127-L_eng.book 23 ページ ２００８年５月７日 水曜日 午前９時２８分
To Next Page
Loading...
