EasyManua.ls Logo

Panasonic DMR-EZ48V

Panasonic DMR-EZ48V
84 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
48
RQT9127
Copying titles or playlists
[RAM] [-R] [-R]DL] [-RW‹V›] [+R] [+R]DL] [+RW]
You can copy programmes recorded on a video cassette onto a disc
from the location
§
of playback as of the copying start of the tape.
§
When you set the recording mode to “FR” ( 49) and “Time
Setting” to “Off” ( 49), you can copy the whole tape from the
beginning to the end.
1 While both DVD and VHS are stopped
Press [FUNCTION MENU].
2 Press [3, 4] to select “Copy” and
then press [OK].
3 Set the copying direction.
Set “Source” to “VHS”.
If you are not going to change the copy direction, press [4]
and skip to step 4.
To change the setting
1 Make sure “Copy Direction” is selected and press [1].
2 Make sure “Source” is selected and press [OK].
3 Press [3, 4] to select “VHS” and then press [OK].
When you set “Source” to “VHS”, “DVD” is automatically
selected in “Destination”.
4 Press [2].
5 Press [4].
4 Set the recording mode.
If you are not going to change the recording mode, press
[4] and skip to step 5.
To change the setting
1 Make sure “Copy Mode” is selected and press [1].
“Format” is automatically set to “VHS-Video”.
2 Make sure “Recording Mode” is selected and press [OK].
3 Press [3, 4] to select the recording mode (XP, SP, LP, EP
or FR) and then press [OK].
About FR mode ( 49)
4 Press [2].
5 Press [4].
GUI (Graphical User Interface) Copying
(VHS l DVD)
Preparation
Turn on the television and select the appropriate video input to
suit the connection to this unit.
When copying an NTSC tape to a DVD, change the “TV
System” to “NTSC” in the Setup menu ( 62). This unit cannot
record NTSC signals to discs that already have PAL signal
recordings.
VHS (Recording source)
Press [DRIVE SELECT] to select the VHS drive.
Insert the video cassette containing the programme to be
copied. ( 14)
Press [1] (PLAY) to play the video cassette and then press
[AUDIO] to select the audio type you wish to record.
Stop the tape at the position where you wish to start recording.
DVD (Recording target)
Press [DRIVE SELECT] to select the DVD drive.
[RAM] Release protection. ( 55)
Insert a disc and confirm there is sufficient empty space for
recording on it. ( 14, 54)
OK
RETURN
OK
RETURN
DMREZ48VGN-RQT9127-L_eng.book 48 ペー 2008年5月7日 水曜日 午前9時28

Table of Contents

Other manuals for Panasonic DMR-EZ48V

Related product manuals