38
Email/Internet Fax Settings
Setting up
■■
■■
■ Setting up the Network Configuration
9
Enter the SMTP Server IP Address
using the Keypad, and then select
“OK”.
Enter the Port Number, and then
select “OK”.
● If you select “No” for DNS Server in step 11
on page 6, the SMTP Server IP Address is
required instead of the SMTP Server name.
10
● When entering a 1 or 2-digit number segment,
enter “00” or “0” in front of the number to scroll
to the next segment of numbers. Press the
“
” key on the Control Panel to enter a
period after the number.
● To correct a mistake, press or to
move the cursor to the right side of the
incorrect address. Select “Clear” to delete,
and then enter the correct address.
8
Select “Invalid” or “Valid” for
“SMTP Authentication”, and then
select “OK”.
● “SMTP Authentication” is the specification
which added the User Authentication function
to SMTP. Authentication of a user account
and password is performed between an
SMTP server and a user in the Email
reception, and only when authenticated, the
transmission of Email is permitted.
● When “Valid” is selected, proceed to step
11.
● When “Invalid” is selected, proceed to step
13.
Enter the SMTP Server Name using
the Keyboard, and then select “OK”.
(Up to 60 characters)
1 2
21
1 2
1
2
To Next Page
Loading...
