Setting up
39
Enter the SMTP AUTH Name
using the Keyboard, and then
select “OK”. (Up to 40 characters)
11
12
Enter the SMTP AUTH Password
using the Keyboard, and then
select “OK”. (Up to 10 characters)
● When entering a 1 or 2-digit number segment,
enter “00” or “0” in front of the number to scroll
to the next segment of numbers. Press the
“
” key on the Control Panel to enter a
period after the number.
● To correct a mistake, press
or to
move the cursor to the right side of the
incorrect address. Select “Clear” to delete,
and then enter the correct address.
● After selecting “OK”, proceed to step 15.
13
Enter the POP Server Name using
the Keyboard, and then select “OK”.
(Up to 60 characters)
Enter the POP Server IP Address
using the Keypad, and then select
“OK”.
● If you select “No” for DNS Server in step 11
on page 6, the POP Server IP Address is
required instead of the POP of POP Server
name.
1 2
1 2
1
2
Continued on the next page...
2
1
To Next Page
Loading...
