EYFR03 User Manual 5 of 110 v1.6.0
Quick Start 20 January 2020
This quick start will guide you through the process of configuring the unit for first time use.
Plug the provided power cable into the unit and 100-240
VAC power and turn on the power switch. The beeper
will sound a series of quick beeps and the display will
show the loading progress.
Once loading is completed, the unit should go to the Run
screen. If the unit stays on the loading screen with an
error, please contact support.
To use a tool with the qualifier, you must first “learn” the
tool to the qualifier. To do so, press the button below
Menu.
Enter the password (1011 by default) using the numeric
keypad and press ENT when completed.
In the menu, press the right arrow to select Tools and
press ENT.
To Next Page
Loading...
