Panasonic EYFR03 - Page 79

EYFR03 User Manual 79 of 110 v1.6.0
Chapter 7: EtherNet/IPTM 20 January 2020
Job Object
Class Code: 67 Hex
The Job Object represents a set of one or more parameter sets that must be performed as a group.
Depending on the device configuration, the parameter sets may or may not be required to run in
sequence.
Class Attributes
ID
Access
Name
Data Type
Description of Attribute
Semantics of Value
1
Get
Revision
UINT
Revision of this object
1
2
Get
Max Instance
UINT
Maximum instance number
of a job object in the device.
The maximum number of
jobs as specified for the
product.
Instance Attributes
ID
Access
Name
Data Type
Description of Attribute
Semantics of Value
1
Set
Name
SHORT_STRING
Name of the tool displayed
on screen
Maximum length is 25
characters
2
Get
Last Modified
DT
Last time the job attributes
were modified
3
Get
Number of Steps
USINT
Number of parameters in
Parameters array
4
Set
Steps
ARRAY of
STRUCT of:
Structure list containing the
parameters to run for the job
Maximum length is 30.
Item number
UINT
Instance number of the item
in the step
Parameter or group
number.
Item type
USINT
Item type
0 – Parameter
1 – Group
Batch
USINT
Batch size
Temporarily overrides,
but does not modify,
batch size in parameter.
Ignored for Group steps.
Services
Service
Code
Available in
Service Name
Description of Service
Class
Instance
0x05
No
Yes
Reset
Resets the job to factory defaults.
0x0E
Yes
Yes
Get_Attribute_Single
Returns the contents of the specified attribute
0x10
No
Yes
Set_Attribute_Single
Modifies a single attribute