Panasonic FP2 Technical Manual

General Specifications FP2 Multi-wire Link Unit
1-8
1.2 Specifications
1.2 Specifications
1.2.1 General Specifications
Item Descriptions
Ambient temperature
0to55
q
C/32 to 131
q
F
Storage temperature
-20 to +70
q
C/-4 to +158
q
F
Ambient humidity
30 to 85 % RH (non-condensing)
Storage humidity
30 to 85 % RH (non-condensing)
Breakdown voltage
500 V AC, 1 minute between external terminal and frame
ground terminal
Insulation resistance
100 M
Ω
or more (measured with a 500 V DC megger testing)
between external terminal and frame ground terminal
Vibration resistance
10 to 55 Hz, 1 cycle/min: double amplitude of 0.75 mm/
0.030 in., 10 min on 3 axes
Shock resistance
98 m/s
2
or more, 4 times on 3 axes
Noise immunity
1,000 Vp-p with pulse widths 50 ns and 1
μ
s
(based on in-house measurements)
Operating conditions
Free from corrosive gases and excessive dust
Current consumption
220 mA or less (at 5 V DC) (
*
Note)
Weight
A
pprox.
110 g/3.880 oz
.
Note
For information concerning restrictions on current consumption,
refer to section 1.4.1.

Panasonic FP2 Specifications

General

Brand	Panasonic
Model	FP2
Category	Controller
Language	English