Panasonic FP2

Parts and Its Functions FP2 Multi-wire Link Unit
2-6
2.1 Parts Terminology
:
ON
, : Rapid blinking (blinking interval: 0.2 sec), : Slow blinking (blinking interval:
1.0 sec),
: OFF
LED
Item
Operation
LED
It
em
W mode W2 mode F mode
PC-L
PC link flag
(effective only in W
d
W2
d)
:PC link operation
status
:PC link operation
status
and W2 modes)
:PC link operation
disabled status
:
Not
used
:PC link
stopped/non-PC
link operation
status
:Non-PC link
operation status
:
Not
used
HI
Communication
d
:500kbps (fixed) :500kbps :500kbps (fixed)
speed
:250kbps
TERM.
Terminal station
:This is the terminal station. :This is not the terminal station.
1/17 -
8/24
Slave station
di l
(f
fti
:Connected
8/24
9/25
-
display (effective
onl
y
in F mode
)
:Not connected
9/25
-
16/32
only
in
F
mode)
:Not used
*
Slave station
numbers are
changed using the
slave station number
display selector
switch.
2.1.2 Slave Station Number Display Selector Switch
Thisisusedtochangethe slavestation number displayedon theoperationstatus indica-
tor LEDs. It is used only in the F mode.
Item Setting contents
1-16
Connected station Nos. 1 to 16 are
displayed.
17-32
Connected station Nos. 17 to 32 are
displayed.