Chapter 1
General Specifications
1.1 How the Multi-wire Link Unit Works 1 - 3........
1.1.1 MEWNET-W Mode 1 - 4...............
1.1.2 MEWNET-W2 Mode 1 - 5..............
1.1.3 MEWNET-F Mode 1 - 6................
1.2 Specifications 1 - 8............................
1.2.1 General Specifications 1 - 8............
1.2.2 Transmission Specifications 1 - 9........
1.2.3 Performance Specifications 1 - 10.......
1.2.3.1 W and W2 Modes 1 - 10........
1.2.3.2 F Mode 1 - 11.................
1.2.4 Transmission Cable Specifications 1 - 12.
1.3 Restrictions When Combinations Are Used 1 - 14.
1.3.1 Restrictions on the CPU 1 - 14..........
1.3.2 Restrictions on the Installation
Position 1 - 14........................
1.3.3 Restrictions on the Number of Units
that can be Installed 1 - 15.............
1.4 Confirming the Design Contents 1 - 16...........
1.4.1 Confirming the Current
Consumption 1 - 16...................
1.4.2 Confirming I/O Allocations 1 - 16........
1.4.3 Confirmation When Multiple Units are
Installed 1 - 17........................
To Next Page
Loading...
Need help?
General
