Panasonic FP2 Technical Manual

Safety Precautions
Observe the following notices to ensure personal safety or to prevent accidents.
To ensure that you use this product correctly, rea
d this User’s Manual thoroughly before use.
Make sure that you fully understand the product and information on safety.
This manual uses two safety flags to indicate different levels of danger.
WARNING
If critical situations that could lead to user’s death or serious injury is assumed by
mishandling of the product.
-Always take precautions to ensure the overall safety of your system, so that the whole system
remains safe in the event of failure of this produ
ct or other external factor.
-Do not use this product in areas with inflammable gas. It could lead to an explosion.
-Exposing this product to excessive heat or open flames could ca
use damage to the lithium battery
or other electronic parts.
CAUTION
If critical situations that could lead to user’s injury or only property damage is assumed
by mishandling of the product.
-To prevent excessive exothermic heat or smoke generation, use this pro
duct at the values less than
the maximum of the characteristics and performance that are assured in these specifications.
-Do not dismantle or remodel the product. It could ca
use excessive exothermic heat or smoke
generation.
-Do not touch the terminal while turning on electri
city. It could lead to an electric shock.
-Use the external devices to function the
emergency stop and interlock circuit.
-Connect the wires or connectors securely.
The loose connection could cause excessive exoth
ermic heat or smoke generation.
-Do not allow foreign matters such as liquid, flammable materials, metals to go into the inside of the
pro
duct. It could cause excessive exothermic heat or smoke generation.
-Do not undertake construction (such as connection and di
sconnection) while the power supply is on.
It could lead to an electric shock.
Copyright / Trademarks
-This manual and its contents are copyrighted.
-You may not copy this manual,in whole or part,without written consent of Pa
nasonic Electric
Works.,Ltd. 
-Windows and Windows NT are registered tradema
rks of Microsoft Corporation in the
United States and/or other countries.
-All other company names and product name
s are trademarks or registered
trademarks of their respective owners.
-Matsushita Electric Works,Ltd. pursues a policy of co
ntinuous improvement of the
Design and performance of its products, therefo
re,we reserve the right to change the manual/
product without notice.
BNTN

Panasonic FP2 Specifications

General

Brand	Panasonic
Model	FP2
Category	Controller
Language	English