Panasonic GT02

9-14
When connecting with self-produced cable using a RJ45 connector
RJ45 modular port
Port 1 viewed from the front of the module (socket side)
MICRO-EH series
PLC type
Link I/F
Wiring diagram
GT series
14 points
20 points
23 points
28 points
40 points
64 points
Port 1 on
CPU
GT series
RS232C
type*
2
GT707
*1:1 The settings vary according to the ports and communication methods. Refer to the above settings
for communication conditions. The 10-point type cannot be used.
*2: This is for RS232C type of GT01/GT02/GT02L/GT03-E/GT05/GT11/GT12/GT21/GT32/
GT32-E/GT703/GT704.