Panasonic GT02

3-3
Communication Parameters Settings
The example of communication settings of GT and PLC is shown below.
Setting Values for GT (Set in the configuration setting of GTWIN.)
Item
Setting
Baud Rate
19200bps
Length of Bits
8
Stop Bits
1
Parity
None
3.1.1 RS232C Connection
Wiring diagram
GT series
GT series RS232C
type*
1 *2
GT707
*1: Although nos.6 and 7 of the models except GT01 are RS/CS, they can be used in the above
connection.
*2: This is for RS232C type of GT01/GT02/GT02L/GT03-E/GT05/GT11/GT12/GT21/GT32/
GT32-E/GT703/GT704.