Panasonic GT02

3-4
3.1.2 RS485 connection
Communication mode on PLC side
Set it to the host communication protocol connection mode.
* For information on the setting method, refer to the “Tcmini” manual.
In case of 7 pins
Wiring diagram
GT series
RS422/RS485 type
In case of 8 pins
Wiring diagram
GT series
RS422/RS485 type
Note:
Confirm the appropriate versions of GTWIN and GT to connect with RS485 type.
GT series
GTWIN Version
GT Version
GT01
Ver.2.71 or later
Ver.1.3 or later
GT02
Ver.2.A0 or later
Ver.1.00 or later
GT02L
Ver.2.B0 or later
Ver.1.00 or later
GT03-E
Ver.2.D0 or later
Ver.1.00 or later
GT05
Ver.2.90 or later
Ver.1.0 or later
GT11
Ver.2.71 or later
Ver.1.20 or later
GT12
Ver.2.97 or later
Ver.1.00 or later
GT21
Ver.2.71 or later
Ver.1.10 or later
GT32
Ver.2.80 or later
Ver.1.00 or later
GT32-E
Ver.2.C0 or later
Ver.1.00 or later