Panasonic GT02

8-2
8.1 KV-10/16/24/40 Series
PLC model selection
Select "Keyence KV-10/16/24/40 series".
Confirm the appropriate versions of GTWIN and GT to connect with Keyence KV-10/16/24/40
series.
GT series
GTWIN Version
GT Version
GT01
Ver.2.80 or later
Ver.1.31 or later
GT02
Ver.2.A0 or later
Ver.1.00 or later
GT02L
Ver.2.B0 or later
Ver.1.00 or later
GT03-E
Ver.2.E0 or later
Ver.1.00 or later
GT05
Ver.2.90 or later
Ver.1.00 or later
GT11
Ver.2.80 or later
Ver.1.21 or later
GT12
Ver.2.97 or later
Ver.1.00 or later
GT21
Ver.2.80 or later
Ver.1.11 or later
GT32
Ver.2.80 or later
Ver.1.00 or later
GT32-E
Ver.2.C0 or later
Ver.1.00 or later
Usable devices
Bit/Word Device
No.
Memo
Bit
Device
Relay
00000-17915
Timer
T000-T249
Counter
C000-C249
High-speed Counter/CTH
CTH0-CTH1
High
-speed Counter Comparator CTC0-CTC3
It is not possible to
output it.
Word
Device
Data Memory
DM0000-DM1999
Temporary Data Memory
DM0000-DM1999
Digital Trimmer
AT0-AT1
Timer(current value)
TC000-TC249
Counter(current value)
CC000-CC249
High-speed counter/CTH (current value)
CTHC0-CTHC1
High-speed Counter Comparator(current Value)
CTCC0-CTCC3
Timer(set value)
TS000-TS249
Counter(set value)
CS000-CS249
High-speed counter/CTH (set value)
CTHS0-CTHS1
High-speed Counter Comparator(set value)
CTCS0-CTCS3
Note1) The high-speed counter comparator cannot output.
Note2) It takes some time for communicating due to limitations of PLC communication protocol.
Therefore, the speed of screen change may be slower, or the response of the touch switches
may be worse.