Panasonic GT02

1-23
Communication Parameters Settings
The example of communication settings of GT and PLC is shown below.
Setting Values for GT (Set in the configuration setting of GTWIN.)
Item
Setting
PLC Unit No.
0
Baud Rate
19200bps
Data Length
8
Stop Bits
1
Parity
Odd
The communication condition setting at the PLC side is not required.
Uncheck the box of “Use Serial Communication”.
1.6.1 MELSEC-Q (CPU) Series
CPU
Link I/F
Wiring diagram
GT Series
Q02CPU
Q02HCPU
Q06HCPU
Q12HCPU
Q25HCPU
RS232C
port on
CPU unit
GT series
RS232C
typ
e*1
GT707
*1: This is for RS232C type of GT01/GT02/GT02L/GT03-E/GT05/GT11/GT12/GT21/GT32/
GT32-E/GT703/GT704.