Panasonic GT02

2-15
* 1 The input in GTWIN is as
follows:
* 2 The input in GTWIN is as
follows:
* 3 The input in GTWIN is as
follows:
* 4 For details, please consult the manual for the PLC you will use.
Usable devices (When the version of GTWIN is 2.95 or older)
There is no restriction on the version of GT firmware if the version of GTWIN is older than Ver2.95.
Bit/Word Device
No.
Bit Device
I/O Relay
Internal H
old Relay
Special Auxiliary Relay
000000
-614315
Data link Relay
LR00000-LR19915
Auxiliary Memory Relay
AR00000-AR95915
Hold Relay
HR00000-HR51115
Timer(contact)
TIM0000-TIM2047
Counter(contact)
CNT0000-CNT2047
Word Device
I/O Relay
Internal Hold
Relay
Special Auxiliary Relay
0000
-6143
Data link Relay
LR000-LR199
Auxiliary Memory Relay
AR000-AR959
Hold Relay
HR000-HR511
Timer(current)
TIM0000-TIM2047
Counter(current)
CNT0000-CNT2047
Data Memory
DM0000-DM9999
*For details, please consult the manual for the PLC you will use.
Note:
- The maximum value that can be set with the GT is described.
- The range of usable addresses differs depending on the model. For details, please consult the manual
for the PLC you will use.