About Printing Control Sheets
• Print the control sheet at the specified size; do not enlarge or reduce the size.
• When printing the control sheet, make sure that the pattern is 25 mm (1 in.) from the top of the page and
centered horizontally.
Center of the page
<Example A4 printout>
<Example A3 printout>
25 mm
(1 in.)
• Use the control sheet that is the same size as the document you are scanning.
• Be careful not to get the control sheet dirty. Do not fold or crease the control sheet. Scanning will not be
performed properly.
• For details on control sheet and separation sheet, refer to section "Detect Control Sheet" in the help for
PIE.
Operating Manual 41
Operation
To Next Page
Loading...
