Panasonic KV-S5078Y - Page 140

General
Item KV-S5078Y KV-S5058
External dimensions
(Width × Depth × Height)
468 mm × 444 mm × 344 mm (18.5 in. × 17.5 in. × 13.5 in.)
Weight 17 kg (37.5 lb.)
Power requirements
*1
AC 100 – 127 V, 50/60 Hz, 1.5 A
AC 220 – 240 V, 50/60 Hz, 0.8 A
Power
consumption
Scanning 90 W or less
Ready 25 W or less
Sleep
1.7 W or less (USB connection)
1.2 W or less
1.7 W or less (LAN Connection)
*2
Power OFF
AC 100 – 127 V: 0.3 W or less
AC 220 – 240 V: 0.3 W or less
Operating environment
*3
Temperature: 5 ℃ – 35 ℃ (41 ℉ – 95 ℉)
Humidity: 20 % – 80 % RH
Storage environment
*3
Temperature: -10 ℃ – 50 ℃ (14 ℉ – 122 ℉)
Humidity: 10 % – 75 % RH
Interface
USB 3.2 Gen1 (backward compatible)
LAN
(10Base-T / 100Base-TX / 1000Base-T)
*4
―
Recommended web browser
Internet Explorer 11
Mozilla Firefox (latest version)
Google Chrome (latest version)
―
*1
The power requirements differ depending on the country/area. Do not use a power source that does not meet the power source
specifications marked on the unit. The power source specifications of this unit are listed on the rating name plate.
*2
If connected to a network device (hub, router, etc.) that supports IEEE802.3az.
*3
About the environmental conditions of Imprinter Unit (KV-SS014), refer to the Installation Manual of Imprinter Unit. When printing in
conditions outside of the imprinter unit’s operating environment, the printing result may be faded or printing may not occur.
*4
To assure continued emission limit compliance, use only shielded LAN cable. The cable should be a CAT 5 (Category 5) or higher
for 10Base-T / 100Base-TX, or CAT 5e (Enhanced Category 5) or higher for 1000Base-T.
12.14 Specifications
140