8. Open the [Preset Scan] sub menu.
• You can register up to 30 settings in total. (3 groups, 10 settings for each group.)
9. Click to register a setting.
10. Register the scan settings as needed.
Output Settings
• Select [Email], [Shared Folder], [FTP], [Cloud] or [SharePoint] as the output method.
• If Shared Folder or FTP is selected as the output destination, a folder path from the list registered in
the Server tab should be selected.
• If "Cloud" or "SharePoint" is selected as the output destination, a folder path configured within the
Image Capture Plus should be selected.
Scan Settings
• Select the setting from Scan Settings List.
• You can register the setting on this screen, too.
6.4.5 Preset Scan Mode
71
To Next Page
Loading...
