Panasonic KX-HDV130

● Example: To enter "Anne" in Latin Mode
[►] [►] [►]
• To switch between uppercase and lowercase, press .
• To enter a character located on the same dialing key as the previous character, move the cursor by
pressing the Navigator Key [►], then enter the desired character.
• If you enter a different character by mistake, press the Navigator Key [◄] or [►] to highlight the character,
press
Clear
to delete it, then enter the correct character.
• To clear an entire line, press
Clear
for more than 1 second.
2.8.4 Using the Incoming/Outgoing Call Log
Displaying the Incoming Call Log
1. In standby mode, press [◄].
2. Press [▲] or [▼] to select "Incoming Call", and then press
OK
.
Note
• If "Missed Calls" is displayed on the LCD in standby mode, select "Missed Call" at step 2.
Displaying the Outgoing Call Log
1. In standby mode, press
Call Log
.
2. Press [▲] or [▼] to select "Outgoing Log", and then press
OK
.
Note
• If "Missed Calls" is displayed on the LCD in standby mode, select "Missed Call" at step 2.
Deleting Items in the Incoming/Outgoing Call Log
[When the Incoming or Outgoing Call Log is displayed]
1. Press [▲] or [▼] to select the desired item, and then press
Menu
.
2. Press [▲] or [▼] to select "Delete"
*1
, and then press
OK
.
3. Press [▲] or [▼] to select "Yes", and then press
OK
.
*1
You can select "Delete All" instead to delete all items.
2.8.4 Using the Incoming/Outgoing Call Log
46 Operating Instructions Document Version: 2017-08