4.2 Setting the Password
The telephone password is not set by default. You must register a password (4 digits) before use. You
cannot use the following features without setting a password:
• Phonebook lock (See "3.6.5 Locking/Unlocking the Local Phonebook".)
Note
• To avoid unauthorized access to this product:
– Set a password that is random and cannot be easily guessed.
– Change the password regularly.
• Make a note of the password so that you will not forget it.
To set
1. In standby mode, press
.
2. Press [▲] or [▼] to select "Basic Settings", and then press
.
3. Press [▲] or [▼] to select "Other Option", and then press
.
4. Press [▲] or [▼] to select "Change Password", and then press
.
5. Enter a new password (4 digits [0–9]).
6. Verify the password by entering it again as in step 5.
4.2 Setting the Password
Document Version: 2017-08 Operating Instructions 71
To Next Page
Loading...
