Panasonic KX-HDV130 - Using the Phonebook; Storing an Item in the Local Phonebook

3.6 Using the Phonebook
3.6.1 Storing an Item in the Local Phonebook
Storing a New Item
1. In standby mode, press
Menu
.
2. Press [▲] or [▼] to select "New Phonebook", and then press
OK
.
a. Enter a name (max. 24 characters), and then press
OK
.
3. Press [▲] or [▼] to select a phone number type ( 1 to 5 ), and then press
OK
.
*1
a. Enter the phone number (max. 32 digits), and then press
OK
.
4. Press [▲] or [▼] to select "Category Off", and then press
OK
.
*2
a. Select a category, and then press
OK
.
5. To select a default number for the entry, press [▲] or [▼] to select "Default TEL No", and then press
OK
.
*3
a. Press [▲] or [▼] to select the number to use as the default number, and then press
OK
.
*3
6. Press
Save
.
*1
Repeat this step to add additional phone number types.
*2
This step can be omitted if you do not want to assign a category.
*3
This step can be omitted if you do not want to assign a default number.
(The first number entered for an entry will automatically be assigned as the default number.)
Note
• The valid digits are "0" through "9", "
", " ", " ", "P".
• To enter characters, see "2.8.3 Entering Characters".
Storing an Item Using the Dialing
You can dial a number first and then add it as a phonebook entry.
To add a new entry using the dialing
1. In standby mode, dial a number.
2. Press .
a. Enter a name (max. 24 characters), and then press
OK
.
3. Press [▲] or [▼] to select a phone number type ( 1 to 5 ), and then press
OK
.
*1
a. Edit the phone number if desired, and then press
OK
.
4. Press [▲] or [▼] to select "Category Off", and then press
OK
.
*2
a. Select a category, and then press
OK
.
5. To select a default number for the entry, press [▲] or [▼] to select "Default TEL No", and then press
OK
.
*3
a. Press [▲] or [▼] to select the number to use as the default number, and then press
OK
.
3.6 Using the Phonebook
60 Operating Instructions Document Version: 2017-08