Network Settings
The administrator password may be required for Network Settings. Contact your administrator for further
information. For available characters, see “5.2 Character Table for Administrator Password".
Sub Item Description Setting Default
IP Mode
Select
Changes the network
settings of the telephone.
Current settings are
displayed as a highlight.
IPv4 / IPv6 / IPv4&IPv6 IPv4
IPv4 Settings Specifies the IPv4
settings.
DHCP Auto /
Manual (DNS 1 / DNS 2)
DHCP –
Auto
Static IP Address
Subnet Mask
Default Gateway
DNS 1
DNS 2
IPv6 Settings Specifies the IPv6
settings.
DHCP Auto /
Manual (DNS 1 / DNS 2)
DHCP –
Auto
RA DNS 1
DNS 2
Static IP Address
Prefix
Default Gateway
DNS 1
DNS 2
LLDP Specifies the LLDP
settings.
PC Port VLAN ID 0
Priority 0
On / Off On
CDP Specifies the CDP
settings.
On / Off Off
VLAN Specifies the VLAN
settings.
Enable VLAN Yes / No No
IP Phone VLAN ID 2
Priority 7
PC VLAN ID 1
Priority 0
Link Speed
*1
Specifies the Ethernet
PHY mode settings.
IP Phone Auto /
100M/Full /
100M/Half /
10M/Full /
10M/Half
Auto
PC Auto /
100M/Full /
100M/Half /
10M/Full /
10M/Half
Auto
4.10.1 System Settings Menu Layout
Document Version: 2017-08 Operating Instructions 91
To Next Page
Loading...
