Panasonic KX-HDV130 - During a Conversation

3.4 During a Conversation
3.4.1 Transferring a Call (Call Transfer)
You can transfer a call to another destination (extension or outside party).
To transfer
1. Press / / TRANSFER during a conversation.
2. Dial the party you want to transfer to
*1
, and then press
Call
.
3. Do one of the following:
a. Confirmation Transfer: Wait until the other party answers and then go on-hook.
b. Automatic Transfer: Go on-hook before the other party answers.
*1
You can also select a phone number from the call history or the phonebook.
Note
• To return to the call before the transfer destination answers, press
/ CANCEL .
To do a blind transfer
1. Press
Blind
during a conversation.
*1
2. Dial the party you want to transfer to
*2
, and then press
Call
.
*1
If blind transfers are not permitted,
Blind
is not displayed. Contact your administrator for further information.
*2
You can also select a phone number from the call history or the phonebook.
3.4.2 Holding a Call
You can put a call on hold by holding the call at your extension.
Note
• Operation for this feature may differ depending on the telephone's configuration. If the following
procedure does not work, contact your administrator for further information.
To hold the current call
1. For KX-HDV130: Press / / HOLD/MESSAGE during a conversation.
For KX-HDV230: Press / / HOLD during a conversation.
Note
• When a program key is assigned as a Line key, if you press a Line key other than the one for the
current call, the call is put on hold or is disconnected depending on the Automatic Call Hold settings.
For details, contact your phone system dealer/service provider.
To retrieve a call on hold at your line (For KX-HDV130)
1. Press / / HOLD/MESSAGE .
*1
*1
When the handset is already off-hook, press and release the hook switch.
3.4 During a Conversation
54 Operating Instructions Document Version: 2017-08