Panasonic KX-HDV130

3.4.4 Talking to Two Parties Alternately (Call Splitting)
When talking to one party while the other party is on hold, you can swap the calls back and forth
(alternately).
To alternate between the parties leaving one party on hold temporarily (For
KX-HDV130)
1. Press
/ / HOLD/MESSAGE during a conversation.
2. Dial the other party's extension number, and then press / ENTER .
3. After talking to the other party, press
/ / HOLD/MESSAGE .
4. Talk to the original party.
To alternate between the parties leaving one party on hold temporarily (For
KX-HDV230)
1. Press
/ / HOLD during a conversation.
2. Dial the other party's extension number, and then press / ENTER .
3. After talking to the other party, press
Line
.
4. Press [▲] or [▼] to select the original party, and then press
OK
.
5. Talk to the original party.
3.4.5 Making a Three-party Conference
During a conversation, you can add an additional party to your call and establish a conference call.
Note
• Your phone system may support advanced conference features, such as conference calls with four or
more parties. In this case, the procedures for handling a conference call may be different from those
explained in this section. For details, contact your phone system dealer/service provider.
Making a Conference Call
1. Press / CONF during a conversation.
2. Dial the party you want to add to the conversation, and then press
Call
.
3. Press
/ CONF .
Removing a Party from the Conference (For KX-HDV130)
During a conference, you can remove other parties from the conference. However, this operation is
available only during conference calls you initiate.
Note
• To reestablish the conference without removing either party, press
/ CONF after step 2 whether on-
hook or off-hook.
1. During a conference call, press / / HOLD/MESSAGE .
2. Press the corresponding key ( / LINE 1/P1 or / LINE 2/P2 ) for the party you want to disconnect
*1
.
3.4.4 Talking to Two Parties Alternately (Call Splitting)
56 Operating Instructions Document Version: 2017-08