EasyManua.ls Logo

Panasonic KX-HTS824 - Page 32

Panasonic KX-HTS824
116 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
When the PBX starts up with an invalid configuration, some cards will be ignored.
Slot
Slot type Card Name Maximum Number
Trunk/Doorphone Slot LCOT4 1
DPH2 1
Extension Slot SLC8 2
DSP Resources
KX-HTS series has a built-in DSP. There are 2 types of DSP resources (Data-ch / PCM-ch), and there is a
maximum of 14 resources each on the KX-HTS series system. DSP resources are consumed for calls,
services (e.g. Paging and Meet Me) and holding calls. Depending on the types of extensions and lines that
form calls and the services carried out, 2 types of DSP resources are consumed in combination as needed
to provide calls and services. If either one or both types of DSP resources are exhausted, it is not possible
to start a new call or service.
DSP
Data-ch
PCM-ch
VM, AA, DISA,
Meet Me, Paging
+1
+1
+2 +2 or 0
RTP Proxy
SLC
Remote
SIP Ext.
SIP Trunk
Remote
SIP Ext.
Remote
SIP Ext.
Remote
SIP Ext.
SIP Trunk SIP Trunk
SIP TrunkSIP Ext. SIP Ext. SIP Ext. SIP Ext.
LCOT
DPH
SLC
LCOT
DPH
+1
+1
+2+2 or 0
+2 or 0
2.3.3 System Capacity
32 Getting Started

Table of Contents

Other manuals for Panasonic KX-HTS824

Related product manuals