Panasonic KX-NCP1000 - Page 133

Programming Manual References
None
Feature Manual References
None
T38 FAX UDPTL Redundancy count for data
Specifies the redundancy count for data when using the T.38 protocol.
Default
0
Value Range
0–3
Maintenance Console Location
3.9 [1-1] Slot—Shelf Property - Virtual IP Gateway
Programming Manual References
None
Feature Manual References
None
T38 FAX Rate Management Method
Specifies the rate management method when using the T.38 protocol.
Default
Transferred TCF
Value Range
Transferred TCF, Local TCF
Maintenance Console Location
3.9 [1-1] Slot—Shelf Property - Virtual IP Gateway
Programming Manual References
None
Feature Manual References
None
Document Version 2009-12 PC Programming Manual 133
3.9 [1-1] Slot—Shelf Property - Virtual IP Gateway