Panasonic KX-NCP1000 - Page 134

Timer
T301
Specifies the maximum time that the PBX waits for a reply after making a call.
Default
1800 ´ 100 ms
Value Range
0–18000 ´ 100 ms
Maintenance Console Location
3.9 [1-1] Slot—Shelf Property - Virtual IP Gateway
Programming Manual References
None
Feature Manual References
None
T302
Specifies the maximum time allowed between each digit on an incoming call. Applies to overlap receiving.
Default
150 ´ 100 ms
Value Range
0–600 ´ 100 ms
Maintenance Console Location
3.9 [1-1] Slot—Shelf Property - Virtual IP Gateway
Programming Manual References
None
Feature Manual References
None
T303
Specifies the maximum time that the PBX waits for a reply after sending the SETUP (call setting) message.
Default
60 ´ 100 ms
134 PC Programming Manual Document Version 2009-12
3.9 [1-1] Slot—Shelf Property - Virtual IP Gateway