Panasonic KX-NS1000 - 2.7.4 Dial Tone Transfer

To make/answer a conference group call (for both extension and outside line)
PT/SLT/PS/SIP Extn./S-PS
Off-hook.
Dial conference
group number
(1 digit).
Enter 32.
Wait for an
answer.
conference
group no.
3 2
C.Tone
Any Telephone
Caller
The telephone
rings.
Off-hook.
Called Party
Enter entry code
(max. 8 digits).
entry code
*
Enter #.
Announce.
• * If you do not enter an entry code when making the conference group call, extensions/outside
telephones can join the conversation without needing to enter an entry code.
• Entry codes can consist of the digits "0" through "9". When " "
is used as an entry code, no
one can join a conversation that is already in progress. "
" must be used by itself (i.e., you
may not combine it with numeric digits). For details, refer to
"
Join After Time Out".
• With PTs and KX-WT125/KX-TCA175/KX-TCA275/KX-TCA185/KX-TCA285/KX-TCA385
PSs, a conference group call can be automatically answered without going off-hook. This
mode is selected through system programming.
• If the Hands-free Answerback feature is enabled, the called extension can answer the
conference group call without going off-hook.
• If using an SLT, SIP phone, or S-PS, the caller can only originate a conference group call
and cannot control the called parties’ call status manually.
For a caller
To make a conversation with a specific party
PT/PS
(DSS)
Press DSS.
During an announcement
User Manual 123
1.7.3 Making a Conference Group Call