To change Caller ID numbers and recorded names
PT/SLT/PS/SIP Extn./S-PS
On-hook.
Log in to your mailbox.
OR
Change the Caller ID number,
then go to STEP A in "To assign Caller ID numbers and recording names".
Change the caller’s name,
then go to STEP B in "To assign Caller ID numbers and recording names".
Accept the current item as is and skip to the next item,
then repeat this step.
1
2
3
Enter 452.
254
OR
To delete Caller ID numbers and recorded names
PT/SLT/PS/SIP Extn./S-PS
Enter 453.
On-hook.
Log in to your mailbox.
5 34
Delete one number.
OR
1
2
Enter 1 or 2.
Delete the announced number.
Keep the number and
announce the next number,
then repeat this step.
OR
1
2
Enter 1 or 2.
When finished, go on-hook.
On-hook.
Delete all numbers,
then go on-hook to finish.
• The number of callers you can assign for this feature is controlled by the System
Administrator.
Live Call Screening (LCS)
While a caller is leaving a message in your mailbox, you can monitor the call without
answering. If you so desire, you can answer the call while monitoring. There are two
methods available (Default: Hands-free mode).
Hands-free mode:
You can monitor the message automatically, live through the telephone speaker.
Private mode:
You will hear an alarm tone while the caller is leaving a message.
User Manual 173
1.8.6 Other Features
To Next Page
Loading...
