Off-hook (One of the following).
• Lift the handset.
• Press the SP-PHONE button.
• Press the MONITOR button.
(To start talking, lift the
handset.)
• Press TALK button.
Press the Call button on the
Doorphone.
On-hook (One of the following).
• Hang up.
• Press the SP-PHONE button.
• Press the MONITOR button.
• Press CANCEL button.
Press the hookswitch lightly.
Press the corresponding feature
button on the proprietary
telephone, KX-UT series SIP
phone, or S-PS.
Talk or make an
announcement.
Enter the required number.
<Example>
Enter the account code.
You will hear a busy,
confirmation, dial, ring or
ringback tone.
B. Tone: Busy Tone
C. Tone: Confirmation Tone
D. Tone: Dial Tone
R. Tone: Ring Tone
R. B. Tone: Ringback Tone
Dial an extension number.
Dial outside phone number.
Dial the telephone number.
Press any dial key (0–9, , #).
Press the HOLD button on your SIP
phone.
Press the REDIAL button on
your SIP phone.
When You Use a Panasonic Proprietary Telephone or KX-UT Series SIP
Phone
Panasonic
proprietary telephones and KX-UT series SIP phones have useful feature buttons that simplify some
operations. For details, refer to the "Location of Controls" or equivalent section in the documentation for your
phone.
Customised Buttons
If the term is in parentheses like (Account) in this manual, it means a flexible button has been made into an
"Account" button. For more information, refer to "3.1.3 Customising the Buttons" when using a PT or PS, or
"Customising the Flexible Buttons" when using Web Maintenance Console.
Note
For KX-UT series SIP phone users:
• KX-UT113/KX-UT123: Customised buttons are not available.
• Other than KX-UT113/KX-UT123: The following buttons can be customised:
26 User Manual
1.1.5 Before Operating the Telephones
To Next Page
Loading...
