Panasonic KX-NS1000 - Page 285

1. Log in to the Message Manager
’s mailbox.
2.
1
to receive the message.
3. Enter the desired number.
1
to listen to new messages.
2
to listen to old messages.
3
to listen to deleted messages.
4. Enter the desired number.
1
to listen to voice messages.
2
to listen to fax message envelopes.
#
to listen to all messages.
5. The system plays each message, identifying the sender and indicating when the message was
recorded.
1
to repeat this message.
1
1
to replay the previous message.
2
to play the next message.
3
to delete this new/old message or recover this deleted message.
4
to reply to this new/old message.
5
to transfer this new/old message.
6
to listen to the message envelope.
• System programming determines if the message envelope is played before each message,
after each message, or only when you press
6
.
7
to rewind a voice message during playback, or print a new/old fax message after listening
to a fax message envelope.
8
to pause or restart the message during playback.
8
4
to increase playback volume during playback.
8
5
to set a Bookmark for the voice message during voice message playback.
8
6
to start playback at the Bookmark for the voice message.
9
to fast-forward during playback.
#
to save as new (when the new message is listened).
0
to listen to the entire menu.
To transfer messages
Messages left in the General Delivery Mailbox should be transferred to their intended recipients on a regular
basis. The Message Manager can add his or her own voice comments when necessary. When a message is
transferred, the original message is not deleted from the General Delivery Mailbox; it must be deleted manually.
User Manual 285
2.2.2 Message Manager Features