Button Steps
One-touch Dialling
Select One-touch from Type.
Then enter the desired number in Dial (max. 32 digits consisting of 0–9,
,
#, T [Transfer], [ ] [Secret], P [Pause], and F [Flash]).
Note
• If you store an outside party’s number, you should first store a line
access number.
If you need to enter an account code, you can enter the specified
account code before the line access number.
<Example>
• For KX-UT series SIP phones and S
-PS users:
Use only 0–9,
, and # for One-touch Dialling buttons. If characters
other
than these are stored, they will be considered invalid. Only the
digits up to an invalid character will be sent when using that
One-touch Dialling button.
Incoming Call Distribution
Group (ICD Group)
Select ICD Group from Type.
Then enter the incoming call distribution group extension number in
Extension Number.
To
specify the ring tone, select the ring tone type from Optional Parameter
(Ringing Tone Type Number).
Message Select Message Waiting from Type.
Message for Another
Extension
Select Message Waiting from Type.
Then enter the extension number or incoming call distribution group
extension number in Extension Number.
Call Forwarding (FWD)/Do
Not Disturb (DND)—Both
calls
Select FWD/DND (Both) from Type.
FWD/DND—Outside calls Select FWD/DND (External) from Type.
FWD/DND—Intercom calls Select FWD/DND (Internal) from Type.
Group FWD—Both calls
Select Group Fwd
(Both) from Type.
Then enter the incoming call distribution group extension number in
Extension Number.
Group FWD—Outside calls
Select Group Fwd
(External) from Type.
Then enter the incoming call distribution group extension number in
Extension Number.
Group FWD—Intercom
calls
Select Group Fwd
(Internal) from Type.
Then enter the incoming call distribution group extension number in
Extension Number.
Account Select Account from Type.
User Manual 337
3.2.1 User Programming
To Next Page
Loading...
