Panasonic KX-NS1000 - Page 6

operation. However, for KX-UT
series SIP phones, a tone may be heard depending on the system settings.
For details, consult your administrator.
b. A maximum of 32 digits can be input on a KX-UT series SIP phone at one time, including feature numbers,
etc.
c. To execute certain operations, you may be required to press the ENTER button on a KX-UT series SIP
phone or the CALL button (soft button) on an S-PS during the operation.
The following 5 operations are examples.
[Examples]
To select an idle outside line automatically
PT/SLT/PS/SIP Extn./S-PS
Off-hook. Talk.
Dial outside phone
number.
Press L-CO or
enter automatic
line access number.
OR
0 9
(L-CO)
/
outside
phone no.
For KX-UT series:
Press ENTER.
OR
For S-PS:
Press CALL.
To call with a verification code
Off-hook.
PT/SLT/PS/SIP Extn./S-PS
74
Enter 47.
Enter .
verification code PIN
verification code
Enter verification code
(max. 4 digits).
Enter verification code
PIN (max. 10 digits).
If a wrong verification code PIN is
entered, you hear an alarm tone.
desired
phone no.
Dial desired
phone number.
Seize an outside line before
entering an outside phone number.
C.Tone &
D.Tone
PIN: Personal Identification Number
For KX-UT series:
Press ENTER.
OR
For S-PS:
Press CALL.
To transfer to an outside party using the PBX service
SIP Extn./S-PS
On-hook.Talk.Seize outside line.
During a conversation
Dial outside phone
number.
outside line
outside
phone no.
*
KX-UT series and S-PS:
Press TRANSFER.
Other than KX-UT series and S-PS:
Press HOLD.
This step can be omitted
(KX-UT series and S-PS only).
HOLD
OR
XFER
For KX-UT series:
Press ENTER.
OR
For S-PS:
Press CALL.
C.Tone
KX-UT series
and S-PS only.
6 User Manual
Feature Highlights