• For KX-NT366/KX-NT553/KX-NT556
/KX-NT560 users:
– When you answer an incoming call or when you seize an outside line, the display
automatically changes to the page that contains the green lit button.
– After customising each button, you can set the displayed text for the button. For details
about customising buttons, refer to "3.1.3 Customising the Buttons".
• For KX-UT248 and KX-UT670 users:
– You can customise the flexible buttons and set the displayed text for each button using
Web
Maintenance Console. For details about customising buttons, refer to "Customising
the Flexible Buttons" in "
Editing Settings in Web Maintenance Console" in
"3.2.1 User Programming".
– For the KX-UT248, the display shows a maximum of 10 characters for each button. For
the KX-UT670, you can specify up to 12 characters, but some characters may not be
displayed depending on the characters used.
260 User Manual
1.14.4 Self Labelling (KX-NT366/KX-NT553/KX-NT556/KX-NT560/KX-UT248/KX-UT670 only)
To Next Page
Loading...
