Panasonic KX-NS700 - Page 89

To disconnect one party and then talk to the other in a three-party conversation
PT/PS
Press TRANSFER once
or twice to establish a
conversation with the
party to be disconnected.
During a conversation
Press FLASH/RECALL.*
Press the flashing CO, ICD Group,
PDN, SDN, or INTERCOM
corresponding to the party on hold.
Talk.
The other party will be put on hold.
OR
(CO)
(ICD Group)
OR
(SDN)
(PDN)
OR
OR
• * In this case, the FLASH/RECALL button on a proprietary telephone must be set to Flash/
Recall mode through system programming.
• During a three-party conversation, pressing the TRANSFER button or Recall/hookswitch
alternates between the other parties in the conversation.
• You
can have a conference with a maximum of eight parties (comprising intercom or outside
lines) simultaneously.
• During a conversation involving four or more parties, you cannot disconnect one party and
maintain the conversation with the other parties.
• Non-KX-UT series SIP phone users cannot originate a conference call, but can be added as
a member.
• When a KX-UT series SIP phone user originates a conference call and one of the other parties
leaves the conference, the KX-UT series SIP phone user will still be able to talk to the
remaining party but will not be able to hold the call.
Customising Your Phone
• 3.1.3 Customising the Buttons
Create or edit a Conference button.
User Manual 89
1.4.5 Multiple Party Conversation