Why does the battery icon flash during a conversation on my Panasonic Telephone?
If the battery icon flashes or beeping tones sound every 5 seconds during a conversation on your Panasonic Telephone, it indicates that the battery is low. Charge the batteries fully.
Why does the alarm sound when I press Redial on my Panasonic Telephone?
If the alarm sounds after pressing the Redial button on your Panasonic Telephone, it is because a number is not saved in the Call Log.
Why does my Panasonic Telephone not ring?
If your Panasonic Telephone does not ring, it might be because the ringer volume is set to OFF or VIBRATION. To resolve this, set it to ring by pressing the Volume Control button. Alternatively, the PS might be out of range, or the Cell Station (CS) could be busy, so move closer to the CS or try again later. Also, the radio channel might be busy, or a radio communication error might have occurred, so try again later.
Why does the alarm sound during a conversation with a weak signal on my Panasonic Telephone?
If the alarm sounds during a conversation while receiving a weak radio signal on your Panasonic Telephone, it means the radio signal is weak. Try moving closer to the CS.
What to do if Panasonic Telephone PS stops working?
If your Panasonic Telephone's PS stops working during operation, try turning the power switch OFF and then ON again. If that doesn't work, re-insert the battery and try again.
Why can't I save a number in my Panasonic Telephone directory?
If you cannot store a phone number and name in the directory of your Panasonic Telephone, it may be because your entry exceeds the maximum digits or characters. Also, avoid pausing for over 30 seconds while programming.
What does "FAULT" mean on Panasonic Telephone?
If your Panasonic Telephone displays "FAULT", consult your dealer.
How to turn on ringer for Panasonic KX-TD1232?
If the Panasonic PBX unit does not ring, the ringer volume selector may be set to "OFF". Set it to "HIGH" or "LOW".
What to do if volume is distorted from external music source on Panasonic KX-TD1232?
If you experience volume distortion from an external music source connected to your Panasonic PBX, the input level from the external music source might be too high. Decrease the output level of the external music source using the volume control on the music source.
Why intercom call from one system to the other is not possible on Panasonic KX-TD1232?
If originating an intercom or outside call from one system to the other is not possible during system connection operation for KX-TD1232 Panasonic PBX, the interface between the systems might be disconnected. Connect the interface between the systems and press the Reset Button on both systems.
General| Type | Hybrid PBX |
|---|---|
| Max CO Lines | 12 |
| Max Extensions | 32 |
| Power Supply | AC 120V, 60Hz |
| Caller ID | Yes |
| DISA/OGM | Yes |
| SMDR | Yes |
| Operating Temperature | 0°C to 40°C |
Details on the main unit of the system.
Information on available telephone models.
List of optional equipment for the system.
Identifies the intended audience for this user manual.
Outlines the structure and sections of the manual.
Details the specifications and models of Digital Proprietary Telephones.
Identifies the buttons and features on various DPT models.
Describes fixed and flexible buttons available on DPTs.
Explains how to enter and exit station programming mode.
Details the default settings and how to program them.
Provides general guidelines for user programming operations.
Explains methods for advancing through programs and entering data.
Provides essential information before using system features.
Covers fundamental operations like making and receiving calls.
Allows setting pre-programmed messages for caller notification.
Summarizes different types of call forwarding options.
Explains how to place calls on hold and retrieve them.
Describes how to enable or disable call reception.
Lists special features available to assigned operators or managers.
Details recording and playing back outgoing voice messages.
Explains display features and access methods for the KX-T7235.
Details call directory functions for specific DPT models.
Describes the purpose and categories of DSS consoles.
Explains how to program DSS and PF buttons.
Details how to call and access extensions using DSS buttons.
Provides examples of various display messages in English and French.
Lists features with their default and additional digits for programming.
Offers solutions for common problems and power failure scenarios.
To Next Page