4-108 DPT Features
P 4.2 DPT Features
Phantom Extension
Allows you to call extensions associated with a Phantom extension. The call is sent to
extensions that have the corresponding Phantom Extension button. The lighting patterns
of the Phantom Extension button and status are as follows.
Off : Idle
Red : You are calling a phantom extension.
Flashing green rapidly : Incoming call
To call a phantom extension
While the Phantom Extension button indicator light is off;
1. Press the flexible button which is assigned as the Phantom
Extension button.
• You may dial the phantom extension number instead.
• The Phantom Extension indicator light turns red (steady).
To transfer a call to a phantom extension
During a conversation with an outside party;
1. Press the flexible button which is assigned as the Phantom
Extension button.
• You may dial the phantom extension number instead.
To answer a phantom extension call
While the Phantom Extension button indicator light is flashing green;
1. Press the flexible button which is assigned as the Phantom
Extension button.
Conditions
• A phantom number must be assigned by System Programming before assigning the
Phantom Extension button by Station Programming or System Programming.
• A flexible CO button can be assigned as the Phantom Extension button.
•
If several extensions have the same phantom extension number, they will ring
simultaneously.
• A maximum of 16 phantom numbers can be assigned.
• The phantom number cannot be used for feature settings such as “Call Forwarding”.
Programming References
• Station Programming (Section 2)
Flexible CO Button Assignment — Phantom Extension Button
• System Programming — Installation Manual
[005] Flexible CO Button Assignment
[124] Phantom Extension Number Assignment
1
1
1
To Next Page
Loading...
