5-54 Standard Telephone Features
L 5.2 Standard Telephone Features
Lockout
If one party in a conversation goes on-hook, they are both disconnected from the speech
path automatically. A reorder tone is sent to the off-hook party before it is disconnected.
No operation is necessary.
Log-In / Log-Out
Allows you to assign the Log-In mode or Log-Out mode within a hunting, ring or UCD
(Uniform Call Distribution) group. When in the Log-Out mode, you can leave the group
temporarily, preventing hunting calls from being sent to your extension.
Log-In / Log-Out
1. Lift the handset.
2. Dial the feature number (45).
3. Dial 1 or 0.
- 1 : for Log-In mode
- 0 : for Log-Out mode
• You hear a confirmation tone and then a dial tone.
4. Hang up.
Conditions
• The default is “Log-In” mode.
• There should be at least one extension that is in Log-In mode.
Feature References
Station Hunting (→ see Installation Manual)
Uniform Call Distribution (UCD)
1
2
4
3
or
To Next Page
Loading...
