Standard Telephone Features 5-23
5.2 Standard Telephone Features C
Call Hold
Allows you to place a call on hold.
To place a call on hold
During a conversation;
1. Flash the hookswitch.
2. Dial the feature number (50).
• You hear a confirmation tone and then a dial tone.
• You may replace the handset.
Retrieving a call on hold
– at the holding extension;
1. Lift the handset.
2. Dial the feature number (50).
Conditions
• To retrieve a call on hold at another extension, refer to “Call Hold Retrieve” in this
manual.
• If a held call is not retrieved within the specific period of time (default: 60 sec.), “Hold
Recall” occurs.
• If a held outside call is not answered with in thirty minutes, it is automatically
disconnected.
• Either an outside or intercom call can be placed on hold at the same time.
Programming References
• System Programming — Installation Manual
[200] Hold Recall Time
Feature References
Call Hold Retrieve
Hold Recall (→ see Installation Manual)
1
2
2
1
To Next Page
Loading...
