Panasonic KX-TD308 - Quick Reference

6-4 Quick Reference
6 Quick Reference
— Loop-CO (L-CO) Button
•Enter into programming mode.
•Press the desired CO button.
•Dial .
•Press STORE button.
•Exit from programming mode.
— Message Waiting (MESSAGE) Button
•Enter into programming mode.
•Press the desired CO button
•Dial 3.
•Press STORE button.
•Exit from programming mode.
— One-Touch Dialing Button
•Enter into programming mode.
•Press the desired CO button
•Dial 2 + desired number.
•Press STORE button.
•Exit from programming mode.
— Phantom Extension Button
•Enter into programming mode.
•Press the desired CO button
•Dial 72 + phantom extension number.
•Press STORE button.
•Exit from programming mode.
— SAVE Button
•Enter into programming mode.
•Press the desired CO button
•Dial 5.
•Press STORE button.
•Exit from programming mode.
— Single-CO (S-CO) Button
•Enter into programming mode.
•Press the desired CO button.
•Dial 0.
•Dial outside line number (1 through 3).
•Press STORE button.
•Exit from programming mode.
— Two-Way Record Button †
•Enter into programming mode.
•Press the desired CO button
•Dial 90 + Voice Mail extension number.
•Press STORE button.
•Exit from programming mode.
— Two-Way Transfer Button †
•Enter into programming mode.
•Press the desired CO button
•Dial 91 + Voice Mail extension number.
•Press STORE button.
•Exit from programming mode.
— Voice Mail (VM) Transfer Button
•Enter into programming mode.
•Press the desired CO button
•Dial 8 + Voice Mail extension number.
•Press STORE button.
•Exit from programming mode.
❐ Full One-Touch Dialing
Assignment
•Enter into programming mode.
•Dial 3.
•Dial 1 or 2.
- 1 : Off mode
- 2 : On mode
•Press STORE button.
•Exit from programming mode.
❐ Handset / Headset Selection
•Enter into programming mode.
•Dial 9.
•Dial 1 or 2.
- 1 : Handset mode
- 2 : Headset mode
•Press STORE button.
•Exit from programming mode.