Panasonic KX-TD308 - Page 389

Quick Reference 6-5
6 Quick Reference
❐ Initial Display Selection
•Enter into programming mode.
•Dial 81.
•Dial 1 or 2.
- 1 : Caller ID
- 2 : Outside line name
•Press STORE button.
•Exit from programming mode.
❐ Intercom Alert Assignment
•Enter into programming mode.
•Dial 4.
•Dial 1 or 2.
- 1 : Ring-Calling (Tone Call) mode
- 2 : Voice-Calling mode
•Press STORE button.
•Exit from programming mode.
❐ Live Call Screening Mode Set †
•Enter into programming mode.
•Dial
7
.
•Dial 1 or 2.
- 1 : for the Hands-free mode
- 2 : for the Private mode
•Press STORE button.
•Exit from programming mode.
❐ Preferred Line Assignment
— Incoming
•Enter into programming mode.
•Dial 2.
•Dial 1, 2, or 3 + outside line number.
- 1 : No Line Preference
- 2 : Ringing Line Preference
- 3 + Outside line number
: Prime Line (Outside Line) Preference
•Press STORE button.
•Exit from programming mode.
❐ Preferred Line Assignment
— Outgoing
•Enter into programming mode.
•Dial 1.
•Dial 1, 2, 3 + outside line number, or press
INTERCOM button.
- 1 : No Line Preference
- 2 : Idle Line Preference
- 3 + Outside line number
: Prime Line (Outside Line) Preference
- INTERCOM
: Prime Line (INTERCOM) Preference
•Press STORE button.
•Exit from programming mode.
❐ Ringing Tone Selection for CO
Buttons
•Enter into programming mode.
•Press the desired CO button.
•Press the same CO button again.
•Dial the tone type number (1 through 8).
•Press STORE button.
•Exit from programming mode.
❐ Self-Extension Number
Confirmation
•Enter into programming mode.
•Dial 6.
•Press HOLD (END) button.
•Exit from programming mode.
❐ Station Programming Data Default
Set
•Enter into programming mode.
•Dial #.
•Press STORE button.
•Exit from programming mode.